IndexIndex-2Local Management SupplementHHierarchy802.1D switching mode 1-3802.1Q switching mode 1-4High Speed Interface screenadvertised ability 1-23configuring an FE-100FX 1-23configuring an FE-100TX 1-24current operational mode 1-22desired operational mode 1-22link status 1-22port type 1-22setting the FE-100FX 1-24setting the FE-100TX 1-24IIGMP/VLAN Configuration screenDefault for new VLANS 1-49IGMP State 1-49IGMP Version 1-47Interface Robustness 1-48Last Member Query Interval 1-48Querier Address 1-48Querier Expire Time 1-48Querier Uptime 1-48Query Interval 1-47Query Response Time 1-48VLAN ID 1-49MMIB Navigator 5-1Module Level Security (2Hxx)setting of 3-9NPort Redirect Configuration screendestination port 1-29source port 1-29VLAN Redirect Configuration screendestination port 1-33source VLAN 1-33Network Tools 5-1built-in commandscdp 5-3OOperating Mode On RepeaterPorts (2Hxx)setting of 3-6Operational modesetting of 1-18PPassword screen 1-2Port Level Security (2Exx)setting of 2-8Port Level Security Configurationscreen (2Exx)action on intruder 2-7address 2-7interface # 2-8port 2-6security state 2-6Port Operating Mode (2Hxx)setting of 3-5Port Priority Configuration screenport # 1-53priority 1-53set all switch port’s flowcontrol 1-53Port Redirect Configuration screendestination port 1-28frame format (read only) 1-29, 1-33frame format (selectable) 1-29redirect errors 1-29, 1-33redirect errors (toggle) 1-29source port1-28status 1-29RRepeater Level Security (2Exx)setting the 2-4Repeater Level SecurityConfiguration screen (2Exx)action on intruder 2-4interface 2-3security state 2-3
