Chapter 1: Changes to Local Management Screens1-16Local Management SupplementPORT REDIRECT CONFIGURATIONUsed to access the Redirect Configuration Menu screen, which providesaccess to the Port Redirect Configuration and VLAN RedirectConfiguration screens. For details, refer to Section 1.10.BROADCAST SUPPRESSION CONFIGURATIONUsed to set a desired limit of received broadcast frames that are forwardedout other interfaces. For details, refer to Section 1.13.REPEATER CONFIGURATION MENUUsed to access the repeater configuration screens, which enable the userto configure operations and security at the connector and port level.In the 2E43-51and 2E43-51R devices, the screens are the Repeater LevelSecurity Configuration and Port Level Security Configuration screens.In the 2H23-50R and 2H33-37R devices, the screens are the RepeaterConfiguration Menu screen and its two subordinate screens, RepeaterLevel Security Configuration and Port Level Security Configurationscreens.For details on setting the security on the repeater devices, refer toSection 1.14.1.7 ETHERNET FULL DUPLEX CONFIGURATIONSCREENThe Ethernet Full Duplex Configuration screen, Figure 1-8, allows theuser to set the front panel ports, individually or all at once, to eitherStandard Ethernet or Full Duplex operation, and monitor each port to seewhether or not it is enabled and linked to another Ethernet device. Referto Section 1.7.1 to set the Operation Mode.To access the Ethernet Full Duplex Configuration screen from the PortConfiguration Menu screen, use the arrow keys to highlight theETHERNET FULL DUPLEX CONFIGURATION menu item andpress ENTER. The Ethernet Full Duplex Configuration screen displays.
