Summary of VLAN Local ManagementLocal Management Supplement1-431.16.3 Setting (Enabling or Disabling) the Port StatusTo set the status of an interface (port), proceed as follows:1. Use the arrow keys to highlight the Status field of the port.2. Use the SPACE bar to toggle to either ENABLED or DISABLED.3. Use the arrow keys to highlight the SAVE command at the bottom ofthe screen.4. Press ENTER. The message “SAVED OK” displays.1.17 SUMMARY OF VLAN LOCAL MANAGEMENTThe VLAN configuration process is an extension of normal LocalManagement operations. A series of Local Management screens providesaccess to the functions and commands necessary to add, change, or deleteVLANs and to assign ports to those VLANs. The IGMP/VLANConfiguration screen has been added to the SmartSwitch device to enablethe operation of IGMP on selected VLANs.A switch supporting 802.1Q VLANs provides the VLAN Configurationscreens as a standard part of its Local Management hierarchy when theswitch is configured to operate in 802.1Q Mode. The hierarchy of theLocal Management screens pertaining to 802.1Q VLAN configuration isshown in Figure 1-17. This supplement shows the revised hierarchy(Figure 1-17) and 802.1Q VLAN Configuration Menu screen(Figure 1-18), and describes how to use the IGMP/VLAN Configurationscreen (Figure 1-19). For information concerning the other VLANscreens, refer to the 802.1Q VLAN User’s Guide (P/N 9032599-02).Figure 1-17 802.1Q VLAN Screen Hierarchy802.1Q VLANConfiguration MenuDevice VLAN ConfigurationPort Assignment ConfigurationVLAN Forwarding Configuration25995_03Port Filtering ConfigurationProtocol VLAN ConfigurationProtocol Ports ConfigurationIGMP/VLAN Configuration
