Chapter 1: Changes to Local Management Screens1-30Local Management Supplement1.11.1 Changing Source and Destination PortsTo add or delete source port and destination port entries and set the FrameFormat and Redirect Errors functions, proceed as follows:1. Use the arrow keys to highlight the Source Port field near the bottomof the screen.2. Press the SPACE bar or BACKSPACE one or more times to incrementor decrement the port number displayed in the brackets [n] until theappropriate port number displays.3. Use the arrow keys to highlight the Destination Port field near thebottom of the screen.4. Use the SPACE bar or BACKSPACE to step to the appropriate portnumber for the destination port.5. Use the arrow keys to highlight the Frame Format field near thebottom of the screen.6. Use the SPACE bar or BACKSPACE to step to the appropriate frameformat setting (NORMAL, TAGGED, or UNTAGGED) for theselected Destination Port.7. Use the arrow keys to highlight the Redirect Errors field near thebottom of the screen.8. Use the SPACE bar to select either the ON or OFF option and pressENTER. ON forces the source port to forward errored frames to thedestination port(s). OFF forces the errored frames to be droppedbefore forwarding traffic.9. Use the arrow keys to highlight the Status field.10. Use the SPACE bar to select either the ADD or DEL (delete) option.Press ENTER. This adds or deletes the selections for the Source Port,Destination Port, Frame Format, and Redirect Errors made in steps 1through 8 and also updates the screen.NOTEA destination port can only be assigned to one source port.
