Enabling and Disabling Ports3-41Using the TSX-1620 Bridge Viewthe forwarding threshold range. (Port color codes are only active if the Color boxis selected in the Forwarding Thresholds window. Color codes are on by default.)Enabling and Disabling a Source Routing Bridge PortWith Source Routing bridging, you can disable all traffic through a particularbridge port, or only traffic that would otherwise be forwarded to a specific port.For example, you can disable all traffic that would be forwarded from port 2 toport 4, but allow traffic to be forwarded from port 2 to ports 1 and 3.The Enable/Disable Source Routing window lets you enable or disable SourceRouting traffic between the selected port (the port you used to open the window)and any other bridge port.To enable or disable a Source Routing bridge port:1. In the Bridge Traffic View, display the Port menu by clicking mouse button 3 inthe Bridge Port box that represents the network that you want to enable ordisable.2. In the Port menu, click on Enable or Disable, drag right to Source Routing,and release to open the Enable/Disable Source Routing window.Figure 3-18. Port Enable/Disable Source Routing Window3. Select one or more Destination Ports in the scroll list by clicking mouse button1 to highlight selections in the list.4. To enable or disable all Destination Ports, click on the Enable or Disablebutton and choose All from the drop-down menu. To enable or disable theports you highlighed in the scroll list, click on the Enable or Disable buttonand choose Selected from the drop-down menu.
