Cabletron Systems WPIM T1 User Manual

Cabletron Systems WPIM T1 User Manual Manual pdf 19 page image

WPIM-T1/DDS User’s Guide2-1CHAPTER 2SETUP AND INSTALLATIONThis chapter details set up and installation of the WPIM-T1/DDS into ahost platform.2.1 INSTALLING THE WPIM-T1/DDSFor additional support related to the WPIM-T1/DDS, refer to the hostplatform manual into which the WPIM-T1/DDS is being installed. Locatethe guide by clicking on the Cabletron Systems QuickSET program groupicon after installing the QuickSET CD on your computer, or see RelatedManuals in the Introduction.2.1.1 Unpacking the WPIM-T1/DDS1. Carefully remove the WPIM-T1/DDS from the shipping box.2. Visually inspect the WPIM-T1/DDS. If there are any signs of damage,contact Cabletron Systems immediately. Refer to Getting Help.Only qualified personnel should install the WPIM-T1/DDS. ThisUser’s Guide is intended for the experienced networkequipment installer.NOTEQuickSET or Local Management must be used to set up theWPIM-T1/DDS in management before any connections aremade to the WAN. Follow the directions carefully.NOTESome WPIMs require version 1.02 or greater of QuickSET toparticipate and function correctly in your network. ContactCabletron Systems to obtain the latest version of QuickSET ifyou do not have it. Refer to Getting Help in the Introduction formore information.Both the WPIM-T1/DDS and the host platform in which theWPIM-T1/DDS is installed are static sensitive devices. Use agrounding strap and follow all static-safe precautions duringinstallation. Failure to do so could result in damage to theWPIM-T1/DDS and the host platform receiving it.