Cabletron Systems WPIM T1 User Manual

Cabletron Systems WPIM T1 User Manual Manual pdf 24 page image

Chapter 2: Setup and Installation2-6WPIM-T1/DDS User’s Guide2.4 CONNECTING THE WAN CABLE TO THEWPIM-T1/DDSBefore connecting any cabling to the WPIM-T1/DDS, the WANconfiguration must be complete. Refer to the previous section forinformation (Section 2.3.2) if the WAN configuration has not beencompleted.The RJ45 cable from the WPIM-T1/DDS must be plugged into the WANconnection wall jack (see Figure 2-3, below). The cables are not suppliedwith the WPIM-T1/DDS, but may be ordered separately from CabletronSystems (cable part number 9372094 for T1, and part number 9360119for DDS service). Refer to Appendix A for details.Figure 2-3 WAN Connection to the WPIM-T1/DDS!CAUTIONDO NOT plug the WAN cable into the external WAN connectionuntil you have properly completed the WAN setup in software. Ifthis cable is plugged in prematurely, before the host unit isconfigured, the telephone company can disable the WAN linefor a period of time. The cable will be plugged in as a final steponce you run the QuickSET configuration, or the LocalManagement configuration.connectWAN Connection Wall JackHost PlatformWPIMT1/DDST1 DDS