Cadillac 2010 STS Owner's Manual

Also see for 2010 STS: Brochure Owner's manual

2. Locate in the garage, the garage door openerreceiver (motor-head unit). Locate the “Learn” or“Smart” button. It can usually be found wherethe hanging antenna wire is attached to themotor-head unit and may be a colored button.Press this button. After pressing this button,complete the following steps in less than30 seconds.3. Immediately return to the vehicle. Press and holdthe Universal Home Remote button that will beused to control the garage door until the garagedoor moves. The indicator light, above the selectedbutton, should slowly blink. This button may needto be held for up to 20 seconds.4. Immediately, within one second, release the buttonwhen the garage door moves. The indicator lightwill blink rapidly until programming is complete.5. Press and release the same button again.The garage door should move, confirming thatprogramming is successful and complete.To program another Rolling Code device such as anadditional garage door opener, a security device,or home automation device, repeat Steps 1-5, choosinga different function button in Step 3 than what was usedfor the garage door opener.If these instructions do not work, the garage dooropener is probably a Fixed Code unit. Follow theProgramming instructions that follow for a Fixed Codegarage door opener.3-51