After you have removed the sight shields (if equipped) on the 4.6L V8 engine, here is what you will see:A. Remote Negative (-) Terminal. See Jump Startingon page 6‑40.B. Remote Positive (+) Terminal. See Jump Startingon page 6‑40.C. Battery. See Battery on page 6‑40.D. Passenger Compartment Air Filter. See PassengerCompartment Air Filter on page 4‑50.E. Power Steering Fluid Reservoir. See PowerSteering Fluid on page 6‑35.F. Engine Oil Fill Cap. See “When to Add Engine Oil”under Engine Oil on page 6‑18.G. Engine Oil Dipstick (Out of View). See “CheckingEngine Oil” under Engine Oil on page 6‑18.H. Brake Master Cylinder Reservoir. See “BrakeFluid” under Brakes on page 6‑37.I. Engine Coolant Surge Tank and Pressure Cap.See Cooling System on page 6‑26.J. Engine Air Cleaner/Filter. See Engine Air Cleaner/Filter on page 6‑23.K. Underhood Fuse Block. See Underhood FuseBlock on page 6‑118.L. Windshield Washer Fluid Reservoir. See “AddingWasher Fluid” under Windshield Washer Fluid onpage 6‑36.If your vehicle is equipped with front compartmentunderhood sight shields, before closing the hood besure to reinstall the sight shields. To reinstall theshields, locate the tabs on the left and right sides andinsert them into the openings in the tower to towerbrace. Then insert the fasteners into the top of theshield and push the fasteners back into place.6-17