Cadillac 2010 STS Owner's Manual

Also see for 2010 STS: Brochure Owner's manual

AVG MPH (AVG km/h)This display shows the average speed of the vehicle inmiles per hour (mph) or kilometers per hour (km/h).This average is calculated based on the various vehiclespeeds recorded since the last reset of this display.To reset AVG MPH, press the reset button. The displaywill return to zero.HUD Speed Advisor ON/OFF(On Vehicles with HUD)If the vehicle has HUD, you can choose to have theSpeed Limit/Speed Advisory display appear in the HUD.The DIC will toggle between ON and OFF. Press thereset button to make your selection. See Head-UpDisplay (HUD) on page 4‑38 for more information.SPEED LIMIT: XXX MPH (SPEED LIMIT:XXX Km/h) or ADVISORY: XXX MPH(ADVISORY: XXX Km/h) (On Vehicleswithout HUD)This display will show the speed limit or the advisedspeed as determined by the information on the mapdisc in the navigation system. If there is no map disc inthe navigation system, this display will not be available.The speed limit and speed advisory displays on the DICand the HUD, if equipped, are for reference only. Theremay be segments of road where speed data has notbeen captured or times where incorrect speed data,or no speed data, will be displayed by the DIC and theHUD due to the navigation system not correctlymatching the vehicle’s position to the actual road.Be aware of this and obey posted speed limitswherever you drive.SPEED ALERTThis display will allow you to customize the speedalert warning. You can choose to have no warningdisplay, or to have it display at the limit, at 5 mph (km/h)over the limit, or at 10 mph (km/h) over the limit.The DIC will toggle between OFF, AT LIMIT, +5 ,+10 (MPH or Km/h). Press the reset button to makeyour selection.TIMER OFFThis display can be used like a stopwatch. You canrecord the time it takes to travel from one point toanother. To access the timer, press the informationbutton until 00:00:00 TIMER OFF displays. To turn onthe timer, press the reset button until TIMER ONdisplays. The timer will then start. To turn off the timer,press the reset button again until TIMER OFF displays.The timer will stop and display the end timing value.To reset the timer, press and hold the reset button afterthe timer has been stopped. The display will returnto zero.4-73