If your vehicle has the base audio system, the followinginformation explains the vehicle personalization on yourvehicle.If your vehicle has the Navigation system, see“Personalization” in the Index of the Navigation Systemmanual for information on vehicle personalization.If your vehicle has the ability to program additionalpersonalization features, the driver's preferences arerecalled by pressing any button on the keyless accesstransmitter, 1 or 2, by selecting Driver 1 or 2 on the radiodisplay, or when a valid keyless access transmitter isdetected upon opening the driver's door.If more than one valid keyless access transmitter isdetected upon opening the driver's door, the driverpreferences for the lowest driver number will berecalled.Certain features can be programmed not to recall untilthe ignition is turned off.The default settings were preset but may have beenchanged.To change feature preferences, use the followingprocedure.Entering the Personal Settings MenuTo enter the feature programming mode:1. The ignition must be either on, in ACCESSORY,or in RAP and the transmission in P (Park) or thevehicle speed less than 6 mph (9 km/h).To avoid excessive drain on the battery, it isrecommended that the headlamps are turned off.2. Press any button on the appropriate keylessaccess transmitter to identify yourself asDriver 1 or Driver 2.3. Turn on the radio by pressing the power/volume knob.4. Press the CNFG radio button or the tune/selectknob located on the right side of the radio to enterthe radio's main menu.5. Turn the tune/select knob and scroll to SETUP.6. Press the tune/select knob to enter theSETUP menu.3-59