Black plate (52,1)Cadillac CTS/CTS-V Owner Manual - 2013 - CRC - 4/18/123-52 Seats and Restraints6. To tighten the belt, push downon the child restraint, pull theshoulder portion of the belt totighten the lap portion of the belt,and feed the shoulder belt backinto the retractor. When installinga forward-facing child restraint, itmay be helpful to use your kneeto push down on the childrestraint as you tighten the belt.Try to pull the belt out of theretractor to make sure theretractor is locked. If theretractor is not locked, repeatSteps 5 and 6.7. Before placing a child in thechild restraint, make sure it issecurely held in place. To check,grasp the child restraint at thesafety belt path and attempt tomove it side to side and backand forth. When the childrestraint is properly installed,there should be no more than2.5 cm (1 in) of movement.If the airbag is off, the off indicator inthe passenger airbag statusindicator will come on and stay onwhen the vehicle is started.If a child restraint has been installedand the on indicator is lit, see “If theOn Indicator Is Lit for a ChildRestraint” under Passenger SensingSystem on page 3‑27.To remove the child restraint,unbuckle the vehicle safety belt andlet it return to the stowed position.