Cadillac 2013 Caddilac CTS Owner's Manual

Contents

Black plate (40,1)Cadillac CTS/CTS-V Owner Manual - 2013 - CRC - 4/18/129-40 Driving and OperatingIf the vehicle has the Stabilitrak®system and begins to limit wheelspin while you are using cruisecontrol, the cruise control willautomatically disengage. SeeStabiliTrak ® System on page 9‑37.When road conditions allow you tosafely use it again, the cruisecontrol can be turned back on.CTS Shown, CTS-V SimilarI (On/Off): Turns the system onor off. The indicator light on thebutton turns on when cruise controlis on.+RES (Resume/Accelerate):Press briefly to make the vehicleresume to a previously set speed,or press and hold to accelerate.−SET (Set/Coast): Press to set thespeed and activate cruise control ormake the vehicle decelerate.[ (Cancel): Press to disengagecruise control without erasing theset speed from memory.Setting Cruise ControlIf the cruise button is on when not inuse, it could get bumped and go intocruise when not desired. Keep thecruise control switch off when cruiseis not being used.The cruise control light on theinstrument cluster comes on afterthe cruise control has been set tothe desired speed.1. Press the I button.2. Get up to the desired speed.3. Press the −SET button andrelease it.4. Take your foot off theaccelerator.Resuming a Set SpeedIf the cruise control is set at adesired speed and then the brakesare applied, the cruise control isdisengaged without erasing the setspeed from memory.Once the vehicle is driving at about40 km/h (25 mph) or more, press the+RES button on the steering wheel.The vehicle returns to the previousset speed and stays there.Increasing Speed While UsingCruise ControlIf the cruise control system isalready activated:. Press and hold the +RES buttonon the steering wheel until thedesired speed is reached, thenrelease it.