Cadillac 2013 Caddilac CTS Owner's Manual

Contents

Black plate (29,1)Cadillac CTS/CTS-V Owner Manual - 2013 - CRC - 4/18/12Instruments and Controls 5-29To reset the timer to zero, press andhold the set/reset button.Inst (Instantaneous) EconomyDisplays the current fuel economy ineither liters per 100 kilometers(L/100 km) or miles pergallon (mpg). This number changesfrequently as driving conditionschange. It cannot be reset.AVG (Average) SpeedDisplays the average speed of thevehicle in either kilometers perhour (km/h) or miles per hour (mph).This calculation is based on thevarious vehicle speeds recordedsince the last reset of this display.Press the set/reset button to resetto zero.SpeedometerDisplays a digital speedometer inthe DIC. The speed displays ineither kilometers per hour (km/h) ormiles per hour (mph). To change theunits from English to metric, see“Units” later in this section.Blank DisplayThis display shows no information.Vehicle Information DisplayMenu ItemsT (Vehicle Information): Pressto display the following menu items:Oil Life RemainingIf the vehicle has this display, itshows the estimated oil liferemaining. If you see 99% Oil LifeRemaining on the display, thatmeans that 99% of the current oillife remains.When the oil life is depleted, theChange Engine Oil Soon messagedisplays. Change the oil as soon aspossible. Additional maintenance isalso recommended in theMaintenance Schedule in thismanual. See Maintenance Scheduleon page 11‑3 and Engine Oil onpage 10‑10.The Oil Life must be reset aftereach oil change. Avoid accidentalresetting of the Oil Life system.It cannot be reset accurately untilthe next oil change. To reset theengine oil life system, See EngineOil Life System on page 10‑12. Thesystem is reset when 100%displays.UnitsSelect to display English or metricunits of measure. Press the set/reset button to select when units isdisplayed.Parking AssistIf the vehicle has the UltrasonicRear Parking Assist (URPA) system,this display allows the system to beturned on or off. Once in thisdisplay, press the set/reset button toselect between On or Off. TheURPA system automatically turnsback on after each vehicle start.