Cadillac 2013 Caddilac CTS Owner's Manual

Contents

Black plate (8,1)Cadillac CTS/CTS-V Owner Manual - 2013 - CRC - 4/18/125-8 Instruments and Controls2. Find the vehicle's currentlocation and variance zonenumber on the map.Zones 1 through 15 areavailable.3. Press V to scroll through andselect the appropriatevariance zone.4. Press 3 until the vehicleheading, for example, N forNorth, is displayed in the DIC.5. Calibrate the compass. See“Compass CalibrationProcedure” following.Compass CalibrationThe compass can be manuallycalibrated. Only calibrate thecompass in a magnetically cleanand safe location, such as an openparking lot, where driving thevehicle in circles is not a danger.Also calibrate the compass, awayfrom tall buildings, utility wires,manhole covers, or other industrialstructures, if possible.If the DIC display does not show aheading, for example, N for North,or the heading does not changeafter making turns, there may be astrong magnetic field interfering withthe compass. Interference may becaused by a magnetic antennamount, magnetic note pad holder,or any other magnetic item. Turn offthe vehicle, move the magneticitem, then turn on the vehicle andcalibrate the compass.Compass Calibration Procedure1. Before calibrating the compass,check that the compass is set tothe correct variance zone. See“Compass Variance (Zone)Procedure” earlier in thissection.Do not operate any switchessuch as window, sunroof,climate controls, seats, etc.during the calibration procedure.2. Press T until PRESS V TOCALIBRATE COMPASSdisplays.3. Press V to start the compasscalibration.