Black plate (53,1)Cadillac CTS/CTS-V Owner Manual - 2011Instruments and Controls 5-53Entry/Exit Recall Off (default):No automatic Entry/Exit Recall willoccur when entering or leaving thevehicle. The Exit recall will onlyoccur after pressing the doormounted EXIT button. This buttonwill cause the drivers seat to moverearward a certain distance, and thesteering column to move full upand full forward, if equipped. EntryRecall will only occur by pressingthe door mounted “1” or “2” button.Entry/Exit Recall On (Vehicleswithout Power Tilt SteeringWheel): If this setting is selectedthe following option will be available.Easy Exit will automatically movethe driver seat rearward a certaindistance when the key is removedfrom the ignition on Key Accessvehicles, or when the ignition isturned off and the driver dooropened on Keyless Accessvehicles. This movement will alsooccur when the door mounted EXITbutton is pressed.Easy Entry will automatically recallthe driver seat and outside mirrormemory positions of the currentdriver (1 or 2) when the ignition isturned on.Entry/Exit Recall On (Vehicleswith Power Tilt Steering Wheel):If this setting is selected thefollowing two options will beavailable.. Entry/Exit Steering and Seat:Easy Exit will automaticallymove the steering column to afull up and full forward positionand move the driver seatrearward a certain distancewhen the key is removed fromthe ignition on Key Accessvehicles, or when the ignition isturned off and the driver dooropened on Keyless Accessvehicles. These movementswill also occur when the doormounted EXIT button is pressed.Easy Entry will automaticallyrecall the driver seat, outsidemirrors and steering columnmemory positions of the currentdriver (1 or 2) when the ignitionis turned on.. Entry/Exit Steering Only:Easy Exit will automaticallymove the steering column to afull up and full forward positionwhen the key is removed fromthe ignition on Key Accessvehicles, or when the ignition isturned off and the driver dooropened on Keyless Accessvehicles. This movement willalso occur when the doormounted EXIT button is pressed.Easy Entry will automaticallyrecall the driver seat, outsidemirrors and steering columnmemory positions of the currentdriver (1 or 2) when the ignitionis turned on.No Change: No change will bemade to this feature. The currentsetting will remain.InformationProvidedby:
