Black plate (78,1)Cadillac CTS/CTS-V Owner Manual - 201110-78 Vehicle CareThere are two minutes to matchthe first tire/wheel position, andfive minutes overall to matchall four tire/wheel positions. If ittakes longer, the matching processstops and must be restarted.The TPMS matching process isoutlined below:1. Set the parking brake.2. Turn the ignition to ON/RUN withthe engine off.3. Press the Remote Keyless Entry(RKE) transmitter's lock andunlock buttons at the same timefor approximately five seconds.The horn sounds twice to signalthe receiver is in relearn modeand Tire Learning Activemessage displays on the DICscreen.4. Start with the driver sidefront tire.5. Place the relearn tool againstthe tire sidewall, near the valvestem. Then press the button toactivate the TPMS sensor.A horn chirp confirms that thesensor identification code hasbeen matched to this tire andwheel position.6. Proceed to the passengerside front tire, and repeat theprocedure in Step 5.7. Proceed to the passengerside rear tire, and repeat theprocedure in Step 5.8. Proceed to the driver side reartire, and repeat the procedurein Step 5. After hearing theconfirming horn chirp, for thedriver side rear tire, the hornsounds two more times to signalthe tire learning mode is nolonger active.9. Turn the ignition to LOCK/OFF.10. Set all four tires to therecommended air pressurelevel as indicated on the tireand loading information label.Tire InspectionWe recommend that youregularly inspect the vehicle'stires, including the spare tire,if the vehicle has one, for signsof wear or damage at leastonce a month.Always remove the tires if anyof the following statementsare true:. You can see the indicators atthree or more places aroundthe tire.. You can see cord or fabricshowing through the tire'srubber.. The tread or sidewall iscracked, cut, or snaggeddeep enough to show cord orfabric.. The tire has a bump, bulge,or split.InformationProvidedby:
