Black plate (45,1)Cadillac CTS/CTS-V Owner Manual (Mid-East) - 2012Driving and Operating 8-45The cruise control light on theinstrument panel cluster comes onafter the cruise control has beenset to the desired speed.1. Press the I button.2. Get up to the desired speed.3. Press the −SET button andrelease it.4. Take your foot off theaccelerator.Resuming a Set SpeedIf the cruise control is set at adesired speed and then the brakesare applied, the cruise control isdisengaged without erasing theset speed from memory.Once the vehicle is driving at about40 km/h (25 mph) or more, press the+RES button on the steering wheel.The vehicle returns to the previousset speed and stays there.Increasing Speed While UsingCruise ControlIf the cruise control system isalready activated:. Press and hold the +RES buttonon the steering wheel until thedesired speed is reached, thenrelease it.. To increase vehicle speed insmall amounts, press the +RESbutton. Each time this is done,the vehicle goes about 1.6 km/h(1 mph) faster.Reducing Speed While UsingCruise ControlIf the cruise control system isalready activated:. Press and hold the −SET buttonon the steering wheel until thedesired speed is reached, thenrelease it.. To slow down in small amounts,press the −SET button on thesteering wheel briefly. Each timethis is done, the vehicle goesabout 1.6 km/h (1 mph) slower.Passing Another Vehicle WhileUsing Cruise ControlUse the accelerator pedal toincrease the vehicle's speed.When you take your foot off thepedal, the vehicle will slow downto the previous set cruise speed.
