Cadillac SRX Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-9087647) - 2016 - crc - 5/4/15Seats and Restraints 572. Adjust the driver seat, power tiltand telescoping steeringcolumn (if equipped), and theoutside mirrors on somevehicles.3. Press and hold MEM (Memory)and 1 until three beeps sound.4. Repeat Steps 1–3 for a seconddriver using 2.Manually Recalling MemoryPositionsPress and hold 1 or 2 to manuallyrecall the previously stored memorypositions. Releasing 1 or 2 beforethe stored positions are reachedstops the recall.Automatically Recalling MemoryPositions (Auto Memory Recall)When enabled in the vehiclepersonalization menu, the AutoMemory Recall feature recalls thepreviously stored memory 1 or 2positions when the ignition ischanged from OFF to ON/RUN orACC/ACCESSORY.To activate, place the ignition in ON/RUN or ACC/ACCESSORY.RKE transmitters are not labeledwith a number. If your memory seatposition is stored to 1 or 2, but thisposition is not automaticallyrecalling, then change the storedposition or switch RKE transmitterswith the other driver.See "Auto Memory Recall" under"Comfort and Convenience" inVehicle Personalization 0 147.To stop recall movement, press oneof the memory, power mirror,or power seat controls, or the powertilt and telescoping steering columncontrols. If On - At Ignition On isselected in the vehiclepersonalization menu, placing theignition in OFF also stops the recall.Easy Exit RecallIf programmed on in the vehiclepersonalization menu, this featureautomatically moves the seatapproximately 7 cm (3 in) rearwardallowing the driver more room to exitthe vehicle.Easy Exit recall activates when oneof the following occurs:. The vehicle is turned off and thedriver door is opened within ashort time.. The vehicle is turned off with thedriver door open.See Vehicle Personalization 0 147.To stop recall movement, press oneof the memory, power mirror,or power seat controls.ObstructionsIf something has blocked the driverseat while recalling a memoryposition, the recall may stop.Remove the obstruction. Then doone of the following:. If automatically or manuallyrecalling the stored memoryposition, press and hold theappropriate manual control fortwo seconds. Try recalling againby pressing the appropriatememory button, then try recallingagain by opening the driver doorand pressing K on the RKEtransmitter.
