Cadillac SRX Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-9087647) - 2016 - crc - 5/4/15Seats and Restraints 91Caution (Continued)Do not fold the empty rear seatwith a safety belt buckled. Thiscould damage the safety belt orthe seat. Unbuckle and return thesafety belt to its stowed position,before folding the seat.If you need to secure more than onechild restraint in the rear seat, seeWhere to Put the Restraint 0 86.This system is designed to makeinstallation of child restraints easier.When using lower anchors, do notuse the vehicle's safety belts.Instead use the vehicle's anchorsand child restraint attachments tosecure the restraints. Somerestraints also use another vehicleanchor to secure a top tether.1. Attach and tighten the lowerattachments to the loweranchors. If the child restraintdoes not have lowerattachments or the desiredseating position does not havelower anchors, secure the childrestraint with the top tether andthe safety belts. Refer to yourchild restraint manufacturerinstructions and theinstructions in this manual.1.1. Find the lower anchors forthe desired seatingposition.1.2. Put the child restraint onthe seat.For the outboard rearseating positions, if thehead restraint interfereswith the proper installationof the child restraint, thehead restraint may beremoved. See “HeadRestraint Removal andReinstallation” at the endof this section.1.3. Attach and tighten thelower attachments on thechild restraint to the loweranchors.2. If the child restraintmanufacturer recommends thatthe top tether be attached,attach and tighten the toptether to the top tether anchor,if equipped. Refer to the childrestraint instructions and thefollowing steps:2.1. Find the top tether anchorand open its cover toexpose the anchor.2.2. Route, attach, and tightenthe top tether according toyour child restraintinstructions and thefollowing instructions:If you are using a dualtether in the rear outboardseating position with anadjustable head restraint,route the dual tetheraround the head restraint.
