Black plate (54,1)Cadillac XTS Owner Manual (GMNA-Localizing-U.S./Canada-6006999) -2014 - CRC - 9/11/133-54 Seats and RestraintsPosition the release button onthe buckle, so that the safetybelt could be quickly unbuckledif necessary.5. Pull the shoulder belt all the wayout of the retractor to set thelock. When the retractor lock isset, the belt can be tightened butnot pulled out of the retractor.6. To tighten the belt, push downon the child restraint, pull theshoulder portion of the belt totighten the lap portion of the belt,and feed the shoulder belt backinto the retractor. When installinga forward-facing child restraint, itmay be helpful to use your kneeto push down on the childrestraint as you tighten the belt.Try to pull the belt out of theretractor to make sure theretractor is locked. If theretractor is not locked, repeatSteps 5 and 6.7. Before placing a child in thechild restraint, make sure it issecurely held in place. To check,grasp the child restraint at thesafety belt path and attempt tomove it side to side and backand forth. When the childrestraint is properly installed,there should be no more than2.5 cm (1 in) of movement.If the airbags are off, the offindicator in the passenger airbagstatus indicator will come on andstay on when the vehicle is started.If a child restraint has been installedand the on indicator is lit, see “If theOn Indicator Is Lit for a ChildRestraint” under Passenger SensingSystem on page 3-29.To remove the child restraint,unbuckle the vehicle safety belt andlet it return to the stowed position.