Black plate (27,1)Cadillac XTS Owner Manual (GMNA-Localizing-U.S./Canada-6006999) -2014 - CRC - 9/11/13Vehicle Care 10-27Wiper Blade ReplacementWindshield wiper blades should beinspected for wear or cracking.It is a good idea to clean the wiperblade assembly on a regular basis.When worn, or when cleaning isineffective, replace the wiper blade.For proper windshield wiper bladelength and type, see MaintenanceReplacement Parts on page 11-14.{ CautionAllowing the wiper arm to touchthe windshield when no wiperblade is installed could damagethe windshield. Any damage thatoccurs would not be covered byyour warranty. Do not allow thewiper arm to touch the windshield.To replace the wiper blade:1. Pull the wiper assembly awayfrom the windshield.2. Lift up on the latch in the middleof the wiper blade where thewiper arm attaches.3. With the latch open, pull thewiper blade down toward thewindshield far enough to releaseit from the J-hooked end of thewiper arm.4. Remove the wiper blade.5. Reverse Steps 1–3 for wiperblade replacement.Windshield ReplacementThe windshield is part of the HUDsystem. If the vehicle has to havethe windshield replaced, get onethat is designed for HUD or theHUD image may look out of focus.
