Black plate (7,1)Cadillac XTS Owner Manual (GMNA-Localizing-U.S./Canada-6006999) -2014 - CRC - 9/11/13Seats and Restraints 3-7Memory SeatsDriver Buttons Shown, PassengerButtons SimilarIf equipped, the SET, "1," "2," andB (Exit) buttons on the driver doorand front passenger door are usedto manually save and recall memorysettings for the driver andpassenger seats. The drivermemory buttons also store outsidemirror and power tilt and telescopingsteering column positions.Storing Memory PositionsTo save positions to the “1” and “2”buttons:1. Adjust the driver or passengerseat to the desired position.If storing a driver position, alsoadjust the outside mirrors andthe power tilt and telescopingsteering column2. Press and release SET, thenimmediately press and hold “1”until a beep sounds.3. Repeat Steps 1 and 2 for asecond driver using “2.”To save positions to the B (Exit)button and easy exit features:1. Adjust the driver or passengerseat to the desired position forgetting out of the vehicle.If storing a driver exit position,also adjust the power tilt andtelescoping steering column andthe outside mirrors on somevehicles.2. Press and release SET, thenimmediately press and hold Buntil a beep sounds.Manually Recalling MemoryPositionsIf the vehicle is off, or in ON/RUN/START but not in P (Park), pressand hold "1," "2," or B to manuallyrecall the previously stored memorypositions. Releasing "1,” "2," or Bbefore the stored positions arereached stops the recall.If the vehicle is in ON/RUN/STARTand in P (Park), press and release“1,” “2,” or B to manually recall thepreviously stored memory positions.Placing the ignition in OFF/LOCKbefore the stored positions arereached stops the recall.If something has blocked the seatand/or power tilt and telescopingsteering column while recalling amemory position, the recall maystop. Remove the obstruction; thenpress and hold the appropriatemanual control for the memory item
