Advanced Guide TroubleshootingContents > Other Usages > Machine SettingsMachine SettingsThis section describes the items you can set or change in Device settings of the Settings menu. Fordetails on setting or changing, refer to the on-screen manual: Advanced Guide .Plain paper feed settingsSelects the paper source (Rear Tray or Cassette) in which you load plain paper. The machine feedsplain paper from the Cassette by default. Use this setting to change the paper source for plainpaper to the Rear Tray.FAX settingsUser settingsConfigure the basic settings for faxing, such as auto print, date/time setting, unit name/telephonenumber registration, volume control, telephone line selection, etc.Transmission settingsConfigure the basic settings for sending faxes, such as ECM transmission, pause time settings,auto redial, fax number re-entry, etc.Reception settingsConfigure the basic settings for receiving faxes, such as ECM reception, fax priority mode, incomingring, fax reception reject, etc.Print settingsPrevent paper abrasionUse this setting only if the print surface becomes smudged.Extended copy amountSelects the amount of image that extends off the paper when making borderless copies.LAN settingsChange wireless/wiredSwitches between wireless LAN and wired LAN networks.Wireless LAN settingsConfigures the wireless LAN connection with WPS (Wi-Fi Protected Setup) or WCN (WindowsConnect Now). WCN setting is only available for Windows Vista.For details, refer to the printed manual: Getting Started.Wireless LAN setting listDisplays the wireless LAN network configurations of the machine on the LCD.LAN setting listDisplays the wired LAN network configurations of the machine on the LCD.IPv4/IPv6 settingPage 104 of 997 pagesMachine Settings
