Advanced Guide > Faxing > Sending/Receiving Faxes Using the Operation Panel of the Machine > Changing the PrintSettingsChanging the Print SettingsThis machine prints received faxes to paper loaded in the machine beforehand. You can use theOperation Panel to change the paper settings for printing faxes. Make sure that the settings areappropriate for the loaded paper.ImportantMX860 seriesLoad Legal-sized paper on the Rear Tray. Only A4 or Letter-sized paper can be fed from theCassette.If paper other than A4, Letter-, or Legal-sized paper is loaded, the received faxes are stored inmemory and Check the page size and press OK. is displayed on the LCD. In this case, replace theloaded paper with A4, Letter-, or Legal-sized* paper, then press the OK button.You can also press the Stop button to close the message and print the stored documents inmemory later. For details, see Printing a Document in Memory .* Legal may not be available depending on the country or region of purchase.If no paper is loaded in the specified paper source, or paper has run out while printing is inprogress, the received faxes are stored in memory and There is no paper. Load paper and pressOK. is displayed on the LCD. In this case, load paper in the Cassette (MX860 series) or on the RearTray and press the OK button.You can also press the Stop button to close the message and print the stored documents inmemory later. For details, see Printing a Document in Memory .NoteIf the sender sends a document that is larger than Letter-size or Legal-size, such as 11" x17", thesender's machine may send the fax automatically reduced in size or divided, or send only a part ofthe original.Setting ItemsPress the Settings button in the fax mode. Use the button to select the setting item. Use thebutton to change the setting.1. Page sizeSelect the page size from A4, 8.5"x11"(LTR), or 8.5"x14"(Legal).2. Media typeThe paper type is set to Plain paper.3. Auto feed sw. (MX860 series)Select whether to switch the paper source automatically.NoteMX860 seriesWhen 8.5"x14"(Legal) is selected as the page size, you cannot select a paper sourceother than the Rear Tray.MX860 seriesPage 694 of 997 pagesChanging the Print Settings