Advanced Guide > Scanning > Other Scanning Methods > Scanning with WIA DriverScanning with WIA DriverYou can scan an image from a WIA-compliant application and use the image in that application.The procedure varies depending on the application. The following procedures are examples only.For details, refer to the application's manual.To scan via a network connection, see " Network Scan Settings ."ImportantIn Windows 2000, you cannot scan using the WIA driver.Some applications do not support continuous scanning from the ADF (Auto Document Feeder).For details, refer to the application's manual.Scanning with WIA Driver 2.0The following is an example of scanning using Windows Photo Gallery.1. Place the documents on the Platen or ADF (Auto Document Feeder).Placing Documents2. In File, click Import from Camera or Scanner..., then double-click WIA Canon (modelname).For network connection, select one with the MAC address after the product name.The scan setting screen appears.ImportantTo set up a network environment, see " About Network Communication ."3. Specify the settings.ScannerThe currently set product name is displayed. To change the scanner, click Change... and selectthe product you want to use.ProfileSelect Photo (Default) or Documents according to the document to be scanned. To save a newProfile, select Add profile.... You can specify the details in the Add New Profile dialog box.SourceSelect a scanner type. To scan from the Platen, select Flatbed. To scan from the ADF (AutoDocument Feeder), select Feeder (Scan one side) or Feeder (Scan both sides).Page 662 of 997 pagesScanning with WIA Driver
