Advanced Guide > Faxing > Sending/Receiving Faxes Using the Operation Panel of the Machine > Using the Caller IDService to Reject CallsUsing the Caller ID Service to Reject CallsIf you subscribe to the Caller ID service, the machine detects the sender's Caller ID. If the sender's IDdoes not match the conditions specified in this setting, the machine rejects the phone call or faxreception from the sender.1. Press the FAX button, then press the Menu button.The FAX menu screen is displayed.2. Use the button to select Settings, then press the OK button.3. Use the button to select Device settings, then press the OK button.4. Use the button to select FAX settings, then press the OK button.5. Use the button to select Reception settings, then press the OK button.6. Use the button to select Caller rejection, then press the OK button.7. Use the button to select Yes, then press the OK button.You can now perform settings for Caller rejection.8. Use the button to select the phone call or fax rejection condition, use thebutton to select the setting, then press the OK button.Set the conditions below.Anonymous no.Selects whether to reject a phone call or fax reception from a sender with no caller identification.Out of areaSelects whether to reject a phone call or fax reception out of the subscribed service area.Rejected numbersPage 703 of 997 pagesUsing the Caller ID Service to Reject Calls