Advanced Guide TroubleshootingContents > Overview of the Machine > How to Navigate Menus on the LCDHow to Navigate Menus on the LCDYou can use the machine to print photos in a memory card, make copies, send/receive faxes, or scanoriginals without a computer. You can also make good use of the various functions of the machine withthe menu screen and the settings screen on the LCD.This section describes the basic operation to use the menu screen and the settings screen in eachmode.Basic Operation in Each ModeBasic Operation on the Settings ScreenBasic Operation in Each ModePress the mode button (A) to switch the screen to the desired mode first.Then, use the Menu button (B) to select available functions in each mode.To change the page size, media type, or image correction, press the Settings button (C).NoteUse the (Up), (Down), (Left), or (Right) button to select the item, and press the OKbutton to set it.You can return the LCD to the previous screen by pressing the Back button.Press the SCAN button to display the Scanned data processing screen, then select whether tosave scanned data in a computer or on a USB flash drive or a memory card inserted in themachine.Press the MEMORY CARD button to display the Card menu screen, and select whether to selectand print a photo in a memory card or use various layouts.For details on each item, see Menu Screens .To select Maintenance or Device settings, press the Menu button to display the Settings menu inany mode.Menu ScreensNoteFor details on maintenance, see Routine Maintenance .Copy modeCopy menu screenStandard copy: See Copying .Special copy: See Using Various Copy Functions .Two-sided copy2-on-1 copyPage 13 of 997 pagesHow to Navigate Menus on the LCD