Advanced Guide > About Network Communication > Troubleshooting > The Following Screen Is Displayed During SetupThe Following Screen Is Displayed During SetupThe Enter Password Dialog Box Is Displayed During SetupThe Dialog Box for Setting the Encryption Is Displayed After Selecting the Access Point in the SearchDialog Box"You are connecting the machine to the non encrypted wireless network" Is DisplayedThe Enter Password Dialog Box Is Displayed During SetupThe following dialog box is displayed if an administrator password is set to the machine whichhas already been set up.Enter the administrator password you have set.Changing the Settings in the Admin Password SheetThe Dialog Box for Setting the Encryption Is Displayed After Selecting the Access Point inthe Search Dialog BoxThis dialog box is displayed automatically if the encryption settings are changed on the accesspoint. You need to change the machine's encryption settings to match those of the access point.For information on the encryption settings, see Changing the Settings in the Wireless LAN Sheet ."You are connecting the machine to the non encrypted wireless network" Is DisplayedSecurity is not configured on the access point. The machine can still be used, so continue thesetup procedure to complete it.ImportantIf you connect to a network that is not protected with security measures, there is a risk ofdisclosing data such as your personal information to a third party.Page topPage 970 of 997 pagesThe Following Screen Is Displayed During Setup