(4) Press the Color button for color copying, or the Black button for black & whitecopying.The machine starts copying.Remove the original on the Platen Glass after copying is completed.ImportantDo not open the Document Cover or move the loaded original until copying is completed.NotePress the Stop button to cancel copying.The machine can receive faxes even in the copy mode (after pressing the COPY button).Changing the SettingsYou can use the Settings button to change the print settings such as page size, media type, or printquality to print.For the operation, Basic Operation on the Settings Screen .Settings Tab 1(1) Page sizeSelect the page size of the paper to print: A4, B5, etc.(2) Media typeSelect the media type of the paper to print: Plain paper, Plus Glossy II, etc.NoteIf you do not select the media type correctly, the machine may feed paper from the wrongpaper source or may not print with the proper print quality. See Paper Source to LoadPaper .(3) Print qualityAdjust the print quality according to the original to copy: High, Standard, etc. The available print qualitysettings depend on the paper selected in Media type.(4) MagnificationSpecify the enlargement/reduction manner. You can specify the copy scale by selecting the optionalnumber or the page size: A4 to 8.5"x11", A4 to B5, etc. If you do not want to enlarge/reduce the page size,select Same magnification. For details, refer to the on-screen manual: Advanced Guide.(5) Paper sourceThe arrow image will appear at the paper source depending on the paper you selected for Page size orMedia type.The arrow image will appear at the Cassette when you selected A4 or Letter-sized plain paper. For otherpapers, it will appear at the Rear Tray.Confirm that the selected paper is loaded in the paper source displayed on the screen.For details on the paper source setting, refer to the on-screen manual: Advanced Guide.Page 55 of 997 pagesMaking Copies
