Canon Arizona 1300 Series User Manual

Fill the Coolant BottleIntroductionCoolant is a used to maintain the temperature of the ink in the printheads.It is important to check the coolant bottle, located in the Primary Ink Bay, to see if the level is low.Keep the coolant level up to ensure proper ink temperature.NOTEThe Accessory Pack that ships with a new printer contains a 2 litre container of coolant. Duringan install the coolant system requires 1.8 litres to fill the coolant bottle and lines. We suggestthat you order more coolant from your sales representative so that you will have some whenyou need to top up the system.Procedure1. Unscrew the nipple from the coolant bottle lid to remove the coolant tube.[94] Coolant Bottle is Located in the Primary Ink Bay2. Remove the coolant bottle from the ink bay.3. Unscrew the coolant bottle lid.4. Get the coolant fluid container that shipped with the printer.5. Fill the coolant bottle.6. Attach the lid to coolant bottle and return it to the Primary ink bay.7. Store the coolant fluid until it is needed again.Fill the Coolant BottleChapter 11 - Maintenance 207