Canon Arizona 1300 Series User Manual

• The Media Advance Correction Factor print (used for roll media only). This print is used tocorrect a certain type of banding related to incorrect media advance - see How to DetermineMedia Advance Correction.The list on the top shows all active jobs that are currently in the print queue. Add a special printfrom the bottom to make it active in the Print Job Control module. If you remove a job from thislist, it is also removed from the Active job list and is not available to print. Special print instancesthat are removed from the Active list do not go to the Inactive list; they are simply removed fromthe list.Loading a Special Print1) Click a special print to select it in the bottom window.2) Click the Add button to place it in the print queue on top.Printing a Special PrintGo to the Print Job Control module to actually print the special print. It will appear in the activejob list and is printed like any other print job.NOTERefer to the sections that document the special prints for details on printing. For example, theNozzle check and the Ship print are printed on I/O paper, while the Ruler Guide Print is printeddirectly on the table. Note that some of the special prints are meant for service technicians onlyand are not for use by the printer operator.ShutdownUse the Shutdown icon when you need to turn the printer power off. The printer should be leftpowered On at all times but there are some exceptions such as some service procedures, or if theprinter requires a reboot.IMPORTANTUsing the main power switch before performing a proper shutdown may damage the printer'sinternal hard disk.Generate LogsTools and Utilities ModuleChapter 4 - Navigate the User Interface 59