8Power Supply• Be sure to connect to an AC 220-240V (50/60 Hz) or AC 120V (60 Hz) powersupply, according to your region’s requirement.• Ensure that the scanner is connected to an independent power outlet. Do notplug the scanner into an outlet shared with another device. If you use anextension cable, pay attention to the total amperage of the cable.• If you are unsure of anything relating to the power supply, contact your servicerepresentative.• Never place an object on top of the power cord or step on the power cord.• Never bundle the power cord or wrap the cord around an object, such as a tableleg.• Do not tug the power cord. When you remove the power cord, grip it by the plughead.• Keep the area around the power outlet free of obstacles.CarryingTake care when moving the scanner. Two people should hold the scanner firmlyon opposite sides when lifting it.■ The scanner weighs 25 kg. Two people must carry the scanner. You may drop thescanner, or pinch your fingers if you attempt to carry it by yourself.■ When moving the scanner, be sure to turn OFF the power and remove any cables. Ifthe cables are not removed before moving the scanner, you may damage the plugs orconnectors by forcibly pulling them out.WARNING
