60Chapter 5 Other FunctionsSetting in the User ModeYou can select the mode of operation (user mode) for the scanner from thoselisted below. Operation panel buzzer settingU01-0 Do not sound buzzer during key operation.U01-1 Sound buzzer during key operation (default). Count Only mode settingU02-0 Do not use the endorser in the Count Only mode (default).U02-1 Use the endorser in the Count Only mode. Endorser Stamp mode settingU03-0 Use the endorser in the check mode (default).U03-1 Use the endorser in the A4 mode. Double feed detection control settings in the Count Only modeU04-0 Do not detect double feed in the Count Only mode (default).U04-1 Detect double feed in the Count Only mode. Staple detection settings in the Count Only modeU05-0 Do not detect staples in the Count Only mode (default).U05-1 Detect staples in the Count Only mode. Staple detection accuracy settingsU06-0 Low level accuracy staple detection.U06-1 Medium level accuracy staple detection (default).U06-2 High level accuracy staple detection. Imprinter control settings in the Count Only modeU07-0 Do not use the imprinter in the Count Only mode (default).U07-1 Use the imprinter in the Count Only mode. Skew detection control settings in the Count Only modeU08-0 Do not use skew detection in the Count Only mode.U08-1 Use skew detection in the Count Only mode (default). Energy-saving mode settingU09-0 Do not go into energy-saving mode.U09-1 Go into energy-saving mode after 10 minutes of no operation(default).
