Playback114vSwitching Between the CF Card SlotsIf both CF card slots contain a CF card, you can switch between them asnecessary.Press the SLOT SELECT button.• The access indicator of the selected CF card slot will illuminate in green.Switching to Other Index ScreensAll of the clips on a CF card can be accessed from the clip index screen.However, you can switch to other index screens that show only clips withan $ mark ([$ Mark] index screen), clips with a % mark ([% Mark]index screen), or photos* ([Photos] index screen).* Photos are saved on the SD card.1 Press the INDEX button.• The index screen selection menu appears.2 Select the desired index screen and then press SET.• The selected index screen appears.• Select [Cancel] instead to cancel the operation.• Press the INDEX button again to return to the clip index screen.Playing Back ClipsYou can play back clips from the clip index screen, [$ Mark] index screenand [% Mark] index screen. Use the playback control buttons on themonitor unit. When the monitor unit is not attached, you have limitedplayback control options (play/pause/stop only) with the buttons on thecamcorder and full playback control options using the joystick andjoystick guide.1 Move the orange selection frame to the clip you want to playback.2 Press the Ò button to start playback.Operating modes:1 $ mark/% mark (A 91, 120)2 Orange selection frame3 Relay recording: Appears when a clip begins onone CF card and continues on the other. (A 44)4 Shot mark (A 90, 124)5 Recording date and time6 Clip name (A 51)7 Clip thumbnail (A 125)8 Currently selected CF card slot (A 43)9 Clip number / Total number of clips10 Recording date (month and day only) and time11 Special recording mode (A 93)12 Time code of thumbnail13 Total recording time14 Embedded custom picture file (A 101)15 Bit rate and resolution (A 55)16 Frame rateCOPY
