39Preparing the CamcorderAdjusting the Grip BeltAdjust the grip belt so that you can reach the START/STOP buttonon the grip unit with your index finger but still have a comfortable butsecure grip.IMPORTANT• Be careful not to drop the camcorder when adjusting the grip belt.Attaching the Handle Unit1 Insert the attachment base at the bottom of the handle unit to thecamcorder’s accessory shoe.2 Tighten the handle unit’s lock screw while gently pressing it down.NOTES• You can use the accessory shoe or the socket for 0.64 cm (1/4 in.)screws on the handle unit to attach a variety of commercially availableaccessories.Attaching a Shoulder StrapPass the ends through the strap mount and adjust the length ofthe strap.IMPORTANT• Be careful not to drop the camcorder when attaching or adjusting theshoulder strap.Removing and Attaching the Terminal CoversYou can remove the plastic covers of the following terminals and SD card slot to access them more readily.Removing the Terminal CoversOpen the terminal cover and gently pull it straight out.• EXT 1 and EXT 2• SYNC OUT• GENLOCK and TIME CODE• HD/SD SDI• CH1 and CH2(XLR terminals on the monitor unit)• × (headphones)• DC IN• SD card slot• REMOTE and HDMI OUT• MIC• WFTCOPY
