Handling Precautions168Handling PrecautionsCamcorderBe sure to observe the following precautions to ensure maximum performance.• Do not carry the camcorder by the LCD panel or monitor unit. Be careful when closing the LCD panel.• Do not leave the camcorder in places subject to high temperatures (like the inside of a car parked under directsunlight), or high humidity.• Do not use the camcorder near strong electromagnetic fields such as near powerful magnets and motors, MRImachines or high-voltage power lines. Using the camcorder in such places may cause anomalies in the video oraudio or video noise to appear.• Do not use or store the camcorder in dusty or sandy places. The camcorder is not waterproof – avoid alsowater, mud or salt. If any of the above should get into the camcorder it may damage the camcorder and/or thelens. Consult a Canon Service Center as soon as possible.• Be careful to avoid dust and dirt particles accumulating on the lens or entering the camcorder. When you finish usingthe camcorder, make sure to attach the body cap to the lens mount and the lens cap and dust cap to the lens.• Do not point the lens or viewfinder lens at the sun or other strong light sources. Do not leave the camcorderpointed at a bright subject. Internal components may become damaged due to concentration of the light bythe lens. Be careful especially when using a tripod or shoulder strap. When you are not using the camcorder orviewfinder, make sure to attach the lens cap to the lens and the viewfinder cap to the viewfinder.• Be careful of heat generated by lighting equipment.• Do not disassemble the camcorder. If the camcorder does not function properly, consult qualified servicepersonnel.• Do not touch the lens contacts on the lens mount. Dirty contacts may cause a poorcontact between the camcorder and the lens resulting in incorrect operation of thecamcorder. After removing the lens, make sure to attach the body cap to the lensmount and the lens cap and dust cap to the lens.• Handle the camcorder with care. Do not subject the camcorder to shocks or vibrationas this may cause damage. When using the shoulder strap, do not allow thecamcorder to swing and hit an object.Long-term storageIf you do not intend to use the camcorder for a long time, store it in a place free of dust, in low humidity, and attemperatures not higher than 30 °C (86 °F).Battery Pack• Dirty terminals may cause a poor contact between the battery pack and the camcorder. Wipe the terminalswith a soft cloth.DANGER!Treat the battery pack with care.• Keep it away from fire (or it might explode).• Do not expose the battery pack to temperature higher than 60 °C (140 °F). Do not leave it near a heater orinside a car in hot weather.• Do not try to disassemble or modify it.• Do not drop it or subject it to shocks.• Do not get it wet.COPY
