Playback116Playback ControlsWhen you play back a clip, operate the buttons on camcorder’s body or onthe monitor unit or use the joystick and joystick guide to use fast playback,play back frame-by-frame or skip clips. Refer to the following table.Available Playback TypesNOTES• There is no audio during any of the playback types listed in the previous table.• During some special playback modes, you may notice some anomalies (blocky video artifacts, banding, etc.)in the playback picture.• The speed indicated on the screen is approximate.• During frame advance, the time advanced between frames depends on the video configuration used:0.2 seconds (for 1280x720/24.00P, 1280x720/23.98P or 1280x720/59.94P), 0.25 seconds (for 1280x720/50.00P) and 0.5 seconds for other video configurations.• You can press the DISP. button to turn the joystick guide display on and off.Playback type OperationFast playbackButtons: Press the Ø or × button.Joystick: During playback, push the joystick up or down.Repeat to increase the playback speed to approximately 5x J15x J 60x the normal speed.Frame advance/reverse Joystick: During playback pause, push the joystick up or down.Skip to the beginning ofthe next clipButtons: Press the Ù button.Joystick: Push the joystick right.Skip to the beginning ofthe current clipButtons: Press the Ú button.Joystick: Push the joystick left.Skip to the previous clip Buttons: Press the Ú button twice.Joystick: Push the joystick left twice.Return to playback mode Buttons: Press the Ò button.Joystick: Press the joystick itself (SET button).7 Playback operation* The playback speed (x5, x15 or x60) will also appear in the indicator.9 Relay recordingAppears when a clip begins on one CF card and continues uninterrupted on the other. 5 indicates the firstpart of the recording, 6 indicates the middle part(s) and 7 indicates the last part.Ð PLAY PlaybackÝ PAUSE Playback pauseÔ/Ó Frame reverse/Frame advanceF FWD × Fast playback*Ø F REV Fast reverse playback*COPY
