129Connecting to an External MonitorUsing the HD/SD SDI TerminalThe digital signal output from the HD/SD SDI terminal includes the videosignal, audio signal and time code signal. If necessary, perform thefollowing procedure to change the output to HD or SD*. Turning theoutput off will conserve the camcorder’s power.* Not available for 24.00P recordings.1 Open the [SDI Output] submenu.[¢ Video Setup] > [SDI Output]2 Select the desired option and then press SET.• If you selected [SD], you can select the SD output method (A 130).NOTES• If necessary, you can superimpose the onscreen displays on the video displayed on the external monitor(A 130).Using the HDMI OUT TerminalThe HDMI TM OUT terminal also offers a digital connection and outputs both a video and audio signal. The outputsignal will automatically switch to HD or SD* depending on the capability of the external monitor.* Not available for 24.00P recordings.NOTES• Correct operation cannot be guaranteed when connecting the camcorder to DVI monitors.• Video may not be output correctly depending on the monitor. In such case, use another terminal.• If necessary, you can superimpose the onscreen displays on the video displayed on the external monitor(A 130).• You can select the SD output method (A 130).Using the SYNC OUT TerminalIn addition to its function as a synchronization signal output terminal, youcan use the SYNC OUT terminal also as a terminal for analog video signaloutput. You can output an HD component video luminance signal or adown-converted SD composite video signal*.* Not available for 24.00P recordings.1 Open the [SYNC Output] submenu.[¢ Video Setup] > [SYNC Output]2 Select [HD-Y] or [Composite] and then press SET.• If you selected [HD-Y] (HD component video, luminance signal), no more settings are necessary. If youselected [Composite] (SD analog composite signal), you can select the SD output method with the followingprocedure.NOTES• When you play back a clip on a monitor with a 4:3 aspect ratio, the monitor will switch automatically towidescreen mode if it is compatible with the Video ID-1 or WSS system.• If necessary, you can superimpose the onscreen displays on the video displayed on the external monitor(A 130).[¢ Video Setup][SDI Output][HD][¢ Video Setup][SYNC Output][Composite]COPY
