3 49RecordingRecording VideoThis section explains the recording basics. Before you begin recording, make a test recording first to check if thecamcorder operates correctly. Record for approximately 6 minutes at 50 Mbps (A 55). Should the camcorderfail to operate correctly, refer toTroubleshooting (A 162).For details on recording audio, refer toRecording Audio (A 80).Preparing to Record1 Attach the monitor unit, handle unit, grip unit, etc. as necessary to build thedesired configuration (A 32).2 Attach a charged battery pack to the camcorder (A 24).3 Insert a CF card into a CF card slot (A 41).• Insert another CF card into the other CF card slot to use relay recording (A 44) ordouble slot recording (A 44).4 Attach a lens (A 32, 34).5 Adjust the viewfinder.NOTES• The camcorder can add a user memo (A 85) to a clip as you record. It can be used to store information suchas the clip name, camera operator and filming location. However, you must set the user memo beforerecording.Recording1 Set the Q switch to CAMERA (A 26).• The camcorder turns on in mode and entersrecord pause mode.• The access indicator for the CF card slot selected forrecording illuminates in red and then changes to green.Operating modes:Tally lampAccess indicatorsCOPY
