6 127External ConnectionsVideo Output ConfigurationThe video signal output from the HD/SD SDI, HDMI OUT and SYNC OUT terminals depends on the clip’s videoconfiguration, the capability of the external monitor (for video output from the HDMI OUT terminal) and on variousmenu settings.Video Output Configuration by TerminalRefer to the following table for the video output configuration from each terminal. If necessary, you cansuperimpose the onscreen displays on the video displayed on the external monitor (A 130).Operating modes:Video Output Configuration by Terminal1 Set [¢ Video Setup] > [SDI Output] to [HD], [SD] or [Off].2 When you set [£ LCD/VF Setup] > [HD Output] (under [Zebra]) to [On], you can display zebra patterns on an externalmonitor. (HD output only. During SD output the zebra pattern will not be output.)3 Video output will automatically switch to HD or SD, depending on the capability of the external monitor.4 Set [¢ Video Setup] > [SYNC Output] to [HD-Y] (HD component video, luminance signal) or [Composite] (SD analogcomposite signal).5 When the camcorder is connected via HDMI OUT terminal to an external monitor, the video signal output from the HD/SD SDIterminal will be the same as that from the HDMI OUT terminal.Terminal JVideo configuration L HD/SD SDI 1, 2 HDMI OUT 2, 3 SYNC OUT 4Type ofrecording Resolution (vertical)/Frame rate HD output SD Output 5 HD output SD output HD Output SD Output24.00P 1080/24.00P 1080/60.00i – 1080/60.00i – 1080/60.00i –720/24.00P 720/60.00P – 720/60.00P – 720/60.00P –NTSC1080/59.94i1080/59.94i 480/59.94i 1080/59.94i 480/59.94P 1080/59.94i 480/59.94i1080/29.97P1080/23.98P1080/slow or fast motion720/59.94P720/59.94P 480/59.94i 720/59.94P 480/59.94P 720/59.94P 480/59.94i720/29.97P720/23.98P720/slow or fast motionPAL1080/50.00i1080/50.00i 576/50.00i 1080/50.00i 576/50.00P 1080/50.00i 576/50.00i1080/25.00P1080/slow or fast motion720/50.00P720/50.00P 576/50.00i 720/50.00P 576/50.00P 720/50.00P 576/50.00i720/25.00P720/slow or fast motionCOPY
