Sending a Document with a Subaddress/Password3-32Sending Documents3NOTE• You can adjust the resolution, contrast, and document type for scanning. (See “Adjustingthe Scan Settings”, on p. 3-4.)• You can also specify a sender’s name with [TTI Selector]. (See “Selecting a Sender’sName”, on p. 3-6.)3 Specify the destinations using the one-touch speed dialing,coded speed dialing, access code dialing, or directory dialingtelephone numbers registered for subaddress/passwordsending.For detailed instructions, see “Using Speed Dialing”, on p. 2-34, or “UsingDirectory Dialing”, on p. 2-42.4 Press (Start) to start scanning immediately.Otherwise, the machine waits five or ten seconds before it starts to scan yourdocuments. This timeout feature can be turned ‘OFF’. (See “TX (Send)Settings”, on p. 11-13.)Subaddress/Password Sending with theOperation Panel KeysNote the following limitations on entering the subaddress/password when you press[Subaddress] and [Password] on the operation panel:• If you frequently need to use a subaddress/password to send a document to more than onelocation, you can register the number, subaddress and password under a one-touch speeddialing key or a coded speed dialing code, and use Sequential Broadcasting. (See“Sequential Broadcasting to More Than One Location”, on p. 3-25.)• You cannot press [Subaddress] or [Password] for a one-touch or coded speed dialing numberthat is set for any other type of transmission but ‘REGULAR TX’. (See “Setting Up One-TouchSpeed Dialing”, on p. 2-9, or “Setting Up Coded Speed Dialing”, on p. 2-18.)• Setting the password is optional, but it is necessary to set the correct password if the otherparty has set a password for their fax machine.Follow this procedure to send a document with a subaddress/password entered by pressing[Subaddress] and [Password] on the operation panel.
