Chapter 8 Receiving Faxes 8-15Receiving Faxes* Based on ITU-T No. 1 Chart, standard mode.Receiving While Performing Other TasksThe unit is a multitasking device so it can receive faxes and voice calls while you areperforming other tasks.If your unit cannot print a received fax because it is performing another task thatprevents it from doing so, it will receive the fax in memory. Then, as soon as itcompletes the other task, your unit automatically prints the received fax from memory.Receiving Faxes in Memory When aProblem OccursIf your unit encounters a problem when receiving a fax, it automatically stores theunprinted pages of the fax in memory. It then displays REC’D IN MEMORY as well asone or more messages in the LCD. For an explanation of the message(s) and detailson the action to take, see p. 13-8.n• The unit’s memory can store up to approximately 256 pages.*• You can set the unit so that it does not store faxes in memory if a problem occurs duringreception (1 MEMORY RX, p. 14-7).• Once the problem is solved and the unit prints the received fax, it will delete the fax frommemory.• If the unit’s memory becomes full while receiving a fax in memory, you will not be able toreceive the remaining pages. Contact the other party and ask them to resend theremainder of the fax.Canceling ReceivingFollow this procedure if you want to stop receiving a fax before reception is completed:1 Press Stop.• Your unit asks you to confirm that youwant to cancel receiving.2 Press T to cancel receiving.• Receiving is not canceled until youpress T. Ex:• If you change your mind and want tocontinue receiving, press #.TX/RX NO. 5003TX/RX CANCELLEDYES=(A) NO=(#)CANCEL? AYES #NO
