6-16 Speed Dialing Chapter 6Using Speed DialingOnce you have registered fax/telephone numbers for one-touch speed dialing(1 p. 6-3), coded speed dialing (1 p. 6-8), or group dialing (1 p. 6-13), you can beginto send documents or make telephone calls with speed dialing.Sending a Document With Speed DialingFollow this procedure to send a document using one-touch speed dialing, coded speeddialing, or group dialing:1 Load the document, face down in the Ex:ADF (1 p. 4-3).• To adjust the resolution and contrast, (Currently used memory)see pp. 7-2, 7-3.• You may be unable to send if thememory used (shown in the LCD) is (Standby to scan)close to 100%. To free up space in theunit’s memory: print, send, or delete anydocuments you no longer need to bestored in memory (1 p. 9-4).2 Enter the one-touch speed dialingbutton or coded speed dialing codeassigned to the fax number or groupyou want to send to.❚ One-touch speed dialing button:Press the one-touch speed dialingbutton you want.❚ Coded speed dialing code:Press Coded Dial, then use thenumeric buttons to enter the two-digit code you want.• If you make a mistake, press Stop andrepeat this step.• NO TEL # appears if no fax/telephonenumber or group is assigned to thespeed dialing button or code youpressed.3 Press Start/Copy to begin scanningfor sending, or wait a few seconds foryour unit to begin scanningautomatically.• If you do not want your unit to beginscanning automatically after a fewseconds, disable the TIME OUT setting(1 p. 14-6).DOCUMENT READYMEMORY USED 0%
