7-6 Sending Faxes Chapter 73 Press Start/Copy to begin scanningfor sending, or if you used speeddialing, wait a few seconds for yourunit to begin scanning automatically.• If you do not want your unit to beginscanning automatically after a fewseconds, disable the TIME OUT setting(1 p. 14-6).• To cancel sending once dialing hasstarted, press Stop then T (1 p. 7-8).• If the number you are calling is busy,your unit redials the numberautomatically after a few minutes(1 p. 7-9).n• You can have up to 20 different jobs waiting in memory to be sent.• The document is automatically deleted from memory after sending. This occurs even ifan error prevents complete transmission of the document.Manual Sending Via the HandsetManual sending via the handset allows you to talk to the other party before sending adocument. This method is useful if the other party must manually activate their faxmachine to receive a fax.nFor this mode, you need to connect the optional handset or a telephone to your unit(1 p. 2-7).Follow this procedure to send a document using manual sending via the handset:1 Make sure you have connected theoptional handset or a telephone toyour unit (1 p. 2-7).2 Load the document, face down in the Ex:ADF (1 p. 4-3).• To adjust the resolution and contrast, (Currently used memory)see pp. 7-2, 7-3.(Standby to scan)3 Press Hook.• You can also lift the handset instead ofpressing Hook.TEL=DOCUMENT READYMEMORY USED 0%
