14-4 Summary of Settings Chapter 14DATE & TIMEUNIT TELEPHONE #UNIT NAMETX TERMINAL IDTTI POSITIONTELEPHONE #MARKSCAN CONTRASTOFFHOOK ALARMVOLUME CONTROLCALLING VOLUMEKEYPAD VOLUMEALARM VOLUMELINE MONITOR VOLRX CALL LEVELTEL LINE TYPESets the current date and time (1 p. 3-6).Enters the fax/telephone number you want to appearat the top of each fax page you send (1 p. 3-6).Enters the name or company name you want to appearat the top of each fax page you send (1 p. 3-7).Set the options for the sender information.Selects whether the sender information is positionedinside or outside the image area (1 p. 3-5).Selects the prefix for the unit number (1 p. 3-5).Selects the scanning contrast (1 p. 7-3).Enables/disables the off hook alarm that alerts youthat the handset is not seated properly in its cradle.Sets the volume of the unit sounds.Selects the ring volume when the unit detects a voicecall.Selects the keypad touch beep volume.Selects the error alarm volume.Selects the line monitor volume (sound during dialing).Selects the ring type for incoming calls.Selects the telephone line type setting for your unit(1 p. 3-8).––––OUTSIDE IMAGEINSIDE IMAGEFAXTELSTANDARDDARKERLIGHTERONOFF–1/2/30 (off)/1/2/30 (off)/1/2/30 (off)/1/2/3HIGHSTANDARDTOUCH TONEROTARY PULSEUSER SETTINGS MenuFor details on accessing the settings below, see p. 14-3.Default settings are shown in bold type.Setting Description Sub-Settings
