Advanced Guide TroubleshootingContents > Overview of the Machine > How to Navigate Menus on the LCDHow to Navigate Menus on the LCDYou can use the machine to print photos in a memory card or USB flash drive, make copies, send/receive faxes, or scan originals without a computer. You can also make good use of the variousfunctions of the machine with the menu screen and the settings screen on the LCD.This section describes the basic operation to use the settings screen in each mode.Basic Operation in Each ModeBasic Operation on the Settings ScreenOther OperationsBasic Operation in Each ModeThe copy, scan, fax, or card mode can be selected.The desired mode can be selected by pressing the mode button on the Operation Panel.On each mode screen, the various functions can be selected or the setting can be changed, with theFunction buttons or the , , , and buttons (Scroll Wheel).Selecting a ModeThe screen will be switched to the selected mode screen by pressing a mode button (A). The Setupmenu screen will appear by pressing the Setup button (B).The lamp on the selected mode button or Setup button will light up.Copy modeDisplays the copy standby screen (standard copy screen). Just load an original and press the Black orColor button. The copy will be made with the same magnification (100%).You can also change the magnification, erase dark frame or shade of bound part when copying abook, or copy an original in various layouts.Scan modeYou can save/forward scanned data to your computer or save them on a memory card or USB flashdrive, with the Operation Panel.Fax modeDisplays the fax standby screen. Just load an original, enter a fax/telephone number, and press theBlack or Color button. The fax will be sent.You can also print received faxes or reports.Card modePage 10 of 1127 pagesHow to Navigate Menus on the LCD
