NoteHere describes the procedure to enter the unit name as example. To display the Userinformation settings screen, see Registering User Information.2. Use the Numeric buttons to enter characters.Press the button repeatedly until the character you want to enter appears.To enter characters (e.g., to enter "EU"):(1) Press the button twice.(2) Press the button twice.To enter a character that is assigned to the same button as theprevious entry (e.g., to enter "A" after "C"):(1) Press the button three times.(2) Press the button, and press the button again.NoteThe following operations are available.- To enter a spacePress the left Function button to select Space. A space can be entered after and betweencharacters.- To move the cursorPress the or button.- To insert a characterMove the cursor under the character to the right of the insertion position, and enter the character.The character on the cursor will move to the right and the new character will be inserted.- To delete a characterMove the cursor under the character to delete, and press the right Function button to select Del.character. When no character is on the cursor, the left character will be deleted (backspace).In the fax/telephone number entry field, the following operations are available.- To enter a spacePress the button.- To delete the last number you enteredPress the button.- To enter a pause "P"Press the Redial/Pause button.Page 26 of 1127 pagesEntering Numbers, Letters, and Symbols
