Advanced Guide > About Network Communication > Changing and Confirming Network Settings > Changing the Settingsin the Wireless LAN SheetChanging the Settings in the Wireless LAN SheetTo change the wireless network settings of the printer, connect the printer and the computer with a USBcable temporarily. If you modify the wireless network settings of the computer over wireless connectionwithout USB connection, your computer may not be able to communicate with the machine aftermodifying the settings.NoteSelect Wireless LAN active in the Change wireless/wired on the Operation Panel to change thesettings in the Wireless LAN sheet.Changing the Machine Settings on the LCD1. Start up the Canon IJ Network Tool.Starting up Canon IJ Network Tool2. Select the printer in Printers.3. Select Configuration from the Settings menu.4. Click the Wireless LAN tab.Click OK after changing configuration. A dialog box is displayed asking you for confirmation beforethe settings are sent to the printer. If you click Yes, the settings are sent to the printer and theTransmitted Settings dialog box is displayed.1. Network TypeInfrastructureConnects the printer to the wireless LAN with an access point.2. SSIDThe SSID of the wireless LAN is displayed.NoteEnter the same SSID that the access point is configured to use. The SSID is case-sensitive.Page 1076 of 1127 pagesChanging the Settings in the Wireless LAN Sheet
