Advanced Guide > Troubleshooting > Print Results Not SatisfactoryPrint Results Not SatisfactoryIf the print result is not satisfactory due to white streaks, misaligned lines, or uneven colors, confirm thepaper and print quality settings first.Check 1: Do the page size and media type settings match the size andtype of the loaded paper?When these settings are incorrect, you cannot obtain a proper print result.If you are printing a photograph or an illustration, incorrect paper type settings may reduce the qualityof the printout color.Also, if you print with an incorrect paper type setting, the printed surface may be scratched.In borderless printing, uneven coloring may occur depending on the combination of the paper typesetting and the loaded paper.The method of confirming the paper and print quality settings differs depending on what you do withyour machine.To copy by operating the machine Confirm by using the Operation Panel on themachine.Setting ItemsTo print from your memory card by operating themachineConfirm by using the Operation Panel on themachine.Setting ItemsTo print from your USB flash drive by operating themachineConfirm by using the Operation Panel on themachine.Setting ItemsTo print from a PictBridge compliant device Confirm by using your PictBridge compliantdevice.Printing Photographs Directly from aCompliant DeviceConfirm by using the Operation Panel on themachine.Changing the Machine Settings on the LCDTo print from a wireless communication device Confirm by using the Operation Panel on themachine.Changing the Machine Settings on the LCDTo print from a computer Confirm by using the printer driver.Printing with Easy SetupCheck 2: Make sure that the appropriate print quality is selectedaccording to the media type and printing data referring to the table inCheck 1.Select a print quality option suitable for the paper and image for printing. If you notice blurs or unevencolors, increase the print quality setting and try printing again.NoteWhen printing from a PictBridge compliant device, set the print quality setting by using theOperation Panel on the machine.You cannot make this setting from a PictBridge compliant device.You cannot change the print quality setting when printing from a wireless communicationdevice.Check 3: If the problem is not resolved, there may be other causes.Page 952 of 1127 pagesPrint Results Not Satisfactory
